The Best Deck Cleaner For Every Deck Material

For larger surfaces, work in small sections to ensure the area stays wet the entire time. Even if you don’t have a power washer, you can still use power washer soap for cleaning. Instead of loading the cleaner into the sprayer, you can apply it with a sponge or mop. Before you can stain a deck, you need to prep and sand the surface. Sweep and wash the deck’s surface to remove all dirt, wood fibers, grease, mold, and mildew. If the surface is dirty, the stain or sealant will not stick. This condition can be decreased greatly with the use of a product call ACL Staticide®.

This may happen once or twice after the initial cleaning. Once that phase is over, keep your composite decking looking good with a necessary routine cleaning. This can be done by diluting 4 parts water with 1-part Spray & Clean and spraying your deck every 60 days or so during the season. You can also spray an hour or two before an oncoming rain storm which is a perfect way to rinse your deck naturally. We try not to play favorites with our products but there’s no denying that Spray & Clean is one of our stars. We’re going to start with this product which you can buy at WashSafe.com. In order to best maintain the surface of your composite deck railing, avoid any products that have acetone and other kinds of solvents, as they will alter the color of the railing.

As with any walking surface, TimberTech Deck or Porch products may become slippery in freezing weather. For ice removal, most products containing calcium chloride can be used without damage to the deck or porch surface. These products may leave a white residue which can be cleaned using the cleaning guidelines in the previous pages.

Cleaning Composite And Wood Decking

Removing Mold, Tree Sap And Mildew Stains On Composite Deck Railings

After washing each board, rinse decking thoroughly with fresh water. When completed, rinse the deck off with water, a pressure washer and/or a scrub brush will assist in the cleaning process. Though bleach will not damage the structure of the deck the way it will with wood and vinyl decks, it could lighten the surface of your composite deck. This is true for products that contain acid as well.

Pressure Washing Your Composite Decking

Pressure washers are ideal for removing dirt and dust from decks but shouldn’t be used to remove stains. In order to best maintain the beauty of your composite deck, it’s important to perform a semi-annual cleaning. Decking materials are extremely susceptible to mold, mildew, stains, and general weathering. It’s important to know how to clean your deck in a way that will not damage or ruin your composite deck. This guide will teach you how to protect your investment by cleaning your deck materials in an efficient and easy manner. Oxygen bleach or powdered oxygen laundry cleaner is safe for use on wood decks and useful in removing mold or spores.

Contact Newtechwood To Learn More About Our Composite Deck Materials

• All-purpose wood deck cleaners contain detergents to dissolve surface dirt, spills, and grime.
• Rusty streaks can also appear around screw heads or along the wood’s grain.
• They’re available pre-mixed or in concentrated crystal or liquid form .
• These cleaners are usually sprayed on, worked into the grain with a deck brush for even coverage, and then rinsed off with a garden hose.
• The cleaners are typically applied to the decking with a sprayer or deck brush, spread evenly with a mop, and then rinsed off with a garden hose.
• Even if they’ve been sealed, wood decks, especially cedar and redwood, eventually begin to dull and take on a weathered, gray appearance.

Just let the machine scrub the deck while it sprays out water and soap. Then, use its water function to wash away the soap and fan function to dry the deck.

How To Treat Stains On Your Outdoor Deck

If your composite deck needs mold or mildew stains removed, you can mix a solution of two parts vinegar and one part water to apply directly to the problem area. Pre-rinsing your deck allows the cleaner to work better and helps soften up the fibers. Dip a soft-bristle brush into the bucket of cleaner and scrub your deck to remove any grime, dirt, and other debris.

Are Pressure Washers Safe For Composite Deck Railings?

It is best if you can allow your deck to dry for hours before staining and sealing. Additionally, there are a number of safe, homemade cleaning solutions you can use on your deck, regardless of whether you have a natural wood or composite deck. These ingredients can be purchased from your local hardware or general store. Washing your deck consists of scrubbing it with a deck cleaning solution and a stiff bristle brush. You will need a bucket, cleaner, garden hose with a water nozzle or power washer, and a brush with an extension pole – unless you want to be scrubbing on your hands and knees. For natural wood lovers, properly cleaning a wood deck requires annual care.

Products are non-toxic, non-flammable, non-staining , completely biodegradable and safe to use. Product is water-based and may require a second application after rain or other weather conditions. Over a period of time, the effect of static will dissipate naturally on the decking surface. Hard water is water with a high amount of mineral deposits like lime, silica and calcium.